Whatsapp
E-Catalog
Tangential Chasers are used as a cutter in the Linco machine. Different types of threads can be cut on the component using a Tangential chaser.
| NOMINAL SECTION OF CHASERS |
| LANDIX, CENDAL & GENTS AND OTHERS DIE HEAD |
| 1" X 1/2" |
| 1.1/8 X 5/8" |
| 1.5/8 X 3/4" |
| 2.1/8 X 15/16" |
| 3"X1.3/64 |
| 4"X1.3/64" |
| 4"X1.7/64 |
| 4"X1.1/4" |
| 4"X1.1/2" |
| 5"X1.1/2" |
| 5"X 2.1/4" (Set of 4 Pcs.) |
| 5"X 2.1/4" (Set of 6 Pcs.) |
| 6"X2.5/8" (Set of 6 Pcs.) |
| CHASERS TO SUIT HEAP DIE HEADS |
| 3.3/4"X1" |
| 3.3/4"X1.1/4" |
| 3.3/4"X1.1/2" |
| CHASERS TO SUIT WAGNOR DIE HEADS |
| 28X13mm |
| 32X13mm |
| 35X16mm |
| 40X20mm |
| 52X20mm |
| 68X20mm |
| 75X25mm |
| 100X25mm |
| 100X40mm |
| CHASER TO SUIT REDIEMATIC DIE HEADS |
| 75X28mm(no.2) |
| 83X40mm(no.3) |
| Available in both Milled Thread and Ground Thread |
| Material | Rake Angle |
|---|---|
| Aluminum | 10-25° |
| Bakelized Paper | 45" Neg. |
| Brass bar | 10-22° |
| Cast | 5° Neg.-0° |
| Bronze Bar | 10-22° |
| Cast | 0-10° |
| Manganese | 0-10° |
| Phosphor | 0-10° |
| Copper | 28° |
| Duralumin | 25-30° |
| Ebonite | 0° |
| Erinoid | 0-10° Neg. |
| Gunmetal | 0-5° |
| Iron, Cast | 15° |
| Malleable | 18-22° |
| Wrought | 5-22° |
| Monel Metal | 25-30° |
| Steel, Cast | 12° |
| Free Cutting | 15-30° |
| High Tensile | 25° |
| Mild | 18-22° |
| Nickel | 18-25° |
| Stainless | 25° |
| Vulcanite | 0° |
All types of threads available.
Both Left Hand and Right Hand Chasers available.
We also manufacture as per customer’s requirement as per drawing or sample.
